Characteristics

• new simple and unique arm design that eliminates the risk of loss and dramatically increases durability.
• Perfectly symmetrical: the symmetrical arms have been designed with a pocket rather than a hole under the motor to increase durability and a press nut is included to simplify fixing and avoid problems with play under your stack.
• Simple maintenance: the flight electronics are mounted on the upper main plate using countersunk screws allowing the attachment of the arm from the electronic support to be completely separated. The arms can thus be replaced using two bolts without disturbing your stack.
• the screws used were custom machined, acting as a solid steel pin through the arm.
• The factory added threaded lock and custom aluminum conical washers distribute the clamping force and ensure the bolts do not vibrate.

Specificities

• Arm: 5.5mm
• Key: 5mm
• Lower Main: 2.5mm
• Upper Main: 2mm
• Top: 2mm
• Camera Sides: 2mm
• Spacer height: 28mm (front) and 20mm (rear)
• Hardware weight: ~ 115-125g
• motor to motor: 225mm (5.2 "propellers)