• - 33%

Great Planes Little Toni 61 ARF .61-.91 63"

Αρχική: 330,00   
220,00 
Κερδίζετε: 110,00 € (33%)
GPMA1320
Σε Απόθεμα
+
Προσθήκη στη Λίστα Αγαπημένων

Περιγραφή



Features

  • Great Planes Little Toni 61 ARF .61-.91 63" GPMA1320
  • Construction: Fiberglass, balsa and plywood
  • Wing: Balsa and plywood, one-piece
  • Fuselage: Fiberglass, pre-painted and trimmed
  • Covering: Top Flite True Red MonoKote, TOPQ0227
  • Radio Compartment: Plywood reinforced
  • Wheel Pants and Cowling: Fiberglass, painted to match covering scheme
  • Canopy: Single, clear
  • Landing Gear: Pre-painted aluminum .12" (3mm) thick w/ 2.25" (70mm) diameter foam main wheels, 1.25" (32mm) foam tailwheel, and pre-bent .08" (2mm) diameter wire tail gear
  • Aileron Control: Dual servo
  • Hardware: Full set included
  • Motor Mount: Nylon adjustable
  • Fuel Tank: 14.2oz (420cc) rectangular
  • Spinner: 3" (76mm) aluminum
  • Building Time: Ready to fly in 12-15 hours
  • Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at date of purchase.

Specifications

  • Wingspan: 63 " (1600mm)
  • Wing Area: 775 sq in (50.06 sq dm)
  • Weight: 7.25 - 8.25lb (3290 - 3740g)
  • Wing Loading: 21.5 - 24.5 oz/sq ft (65 - 75 g/sq dm)
  • Length: 56.5" (1435mm)
  • Airfoil: Fully symmetrical, low-wing configuration
  • Center of Gravity: 3-3/8" (86mm) Measured from wing's leading edge at the fuselage sides.
  • Control Throws- Low Rate High Rate
  • Ailerons: Up & Down �" (6.35mm) 3/8" (9.5mm)
  • Elevator: Up & Down �" (12.7mm) �" (19mm)
  • Rudder: Right & Left �" (19mm) 1-1/8" (28mm)
  • Incidence-
  • Stab: 0�
  • Bottom Wing: 0�
  • Engine: +2� up, 3� right
  • Dihedral- With one panel lying flat, tip of other panel should be 6" (152mm)

Contents

  • Pre-built wing fuselage and tail assemblies prebent aluminum main landing gear, 2 main wheels, tailwheel wire with wheel, engine mount, hardware package, fiberglass cowling and wheel pants, clear canopy, decals, aluminum spinner, photo-illustrated instructions,

Requirements

  • Engine: .61 cu in (10cc) 2-stroke OR .91 (15cc) 4-stroke
  • Muffler: Stock type supplied with engine, engine mounts at 90� angle
  • Radio: 4-Channel
  • Servos: 4-with at least 54 oz-in torque
  • 1-with at least 30 oz-in torque (for throttle) (2-ailerons, 1-elevator, 1-rudder, 1-throttle)
  • Servo Extension: Two 6" (152mm)-for ailerons
  • Y-Harness: One-for aileron servos
  • Misc. Items: glow plug, �" foam rubber padding, 3' medium fuel tubing, fuel filter, propeller, building and field equipment.

Comments

  • To convert this airplane to Brushless motor power, the following items are required:
  • KONG5060-Kontronik 600 Brushless Motor Set
  • JTCG6801-Motor Mount
  • 7-cell NiMH 1900mAh batteries (3 required)
  • Charger-Great Planes TRITON series
  • APCQ4145-14x7 Prop for Electric Motors
  • GPMQ4442-Servo Tape
  • WSDM3001-Dean's Ultra Plug (quantity depends on how battery pack is assembled)
  • GPMQ4610-6mm Prop Adapter
  • Tie Straps
  • If a replacement fuel tank is needed the Great Planes 14oz, GPMQ4106 can be used. A separate section of plywood must be glued to the firewall to clear the lip on the replacement tank and the stopper hole re-drilled in the firewall.
  • Pilot head pictured on box is not included. A �-Scale Sportsman Pilot will fit under canopy.
  • This spinner differs from the one shown in the manual. It includes a spinner adapter nut that fits the O.S. .61 two-stroke and .91 four stroke engines. It may be necessary to shorten the length of the spinner cone attachment bolt depending what propeller you choose.